|
|
Aluminium Alloy 2024 T3
Aluminium Alloy 2024 T3 Plate Supplier | Aluminium Alloy 2024 T3 Plate Manufacturer in Mumbai
Chandan Steel World offers Aluminium Alloy 2024 T3 Plate , UNS A92024 2024 T3 Plate products designed for the aerospace and high-strength market, Commercial and structural application. Our expert team stringently checks these products on quality parameters to ensure flawless product range.
Round Bar is stocked in the range 1/2inch to 12inch diameter
Plate is stokced in thicknesses 1/2inch to 4 inch
Specification Of Aluminium Alloy 2024 T3
Aluminium Alloy // ASTM & FED-QQ // QQ-A-200/3 T3511 Bar
A high strength alloy with, dependent upon temper, minimum Proof Stress up to 56 ksi / 385 Mpa and minimum Tensile Strength up to 70 ksi / 482 MPa.
Used in high strength applications where no welding is required.
ALLOY DESIGNATIONS
Aluminium alloy QQ-A-200/3 has similarities to the following standard designations and specifications but may not be a direct equivalent:
AMS 4164, AMS 4165
TEMPER TYPES
Alloy QQ-A-200/3 is supplied in a wide range of tempers:
- O - Soft
- T3 - Solution heat treated, cold worked and naturally aged
- T3510 - Solution heat treated and stress-relieved by stretching. Equivalent to T4 condition.
- T3511 - Solution heat treated and stress-relieved by stretching. Equivalent to T4 condition.
- T42 - Solution heat treated and naturaly aged to a substantially stable condition
- T81 - Solution heat treated, cold worked then artificially aged
- T8510 - Solution heat treated, stress-relieved by stretching then artificially aged
- T8511 - Solution heat treated, stress-relieved by stretching then artificially aged
SUPPLIED FORMS
Alloy QQ-A-200/3 is supplied in Bar, Rod, Wire, Tube and Extruded Sections.
Aluminium Sheet and Coil |
Alloy |
AA1050, AA19000, AA2014, AA2024, AA6082, AA6061, AA3003, AA5083, AA5052, AA7075, AA7050 |
Thickness (mm) |
0.5mm to 4mm for sheet and coil |
Width (mm) |
900, 1200, 1500, 2000, Customer specific width |
Length (mm) |
1200, 1800, 2400, 3000, Customer specific length |
Finish |
Mill |
Aluminium Plate |
Alloy |
AA1050, AA19000, AA2014, AA2024, AA6082, AA6061, AA3003, AA5083, AA5052, AA7075, AA7050 |
Thickness (mm) |
4 to 300 |
Width (mm) |
100 to 1524 |
Length (mm) |
2400 to 12000, Customer specific length |
Finish |
Mill |
Chemical Composition of Aluminium Alloy 2014 Plate
| Chemical Composition Limits |
| Weight% |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Other Each |
Other Total |
Al |
| 2024 USA |
0.50 max |
0.50 max |
3.8-4.9 |
0.3-0.9 |
1.2-1.8 |
0.10 max |
0.25 max |
0.15 max |
0.05 max |
0.15 max |
Rem |
| 2024A France |
0.15 max |
0.20 max |
3.7-4.5 |
0.15-0.8 |
1.2-1.5 |
0.10 max |
0.25 max |
0.15 max |
0.05 max |
0.15 max |
Rem |
|
