Stainless Steel

Stainless Steel AISI422 Rods

STAINLESS STEEL 422GENERAL CHARACTERISTICS OF STAINLESS 422 With better strength at higher temperatures, Stainless steel 422 is an appealing alternative to Stainless 403. It offers ductility and strength from room temperature to 1200°F (649°C) and resists scaling and oxidation to 1400°F (760°C).

CHEMICAL COMPOSITION OF STAINLESS STEEL 422
●  Carbon 0.20-0.25
●  Manganese 1.00 max
●  Molybdenum 0.75-1.25
●  Chromium 12.00-14.00
●  Silicon 1.00 max
●  Sulfur 0.03 max
●  Nickel 0.40-1.00
●  Tungsten 0.75-1.25
●  Vanadium 0.20-0.50
●  Phosphorus 0.04 max
●  Iron balance

HEAT TREATMENT OF STAINLESS 422
●  To anneal, heat to 1600° to 1650°F (871° to 899°C), then slowly cool in furnace
●  For stress relief, heat to 1100° to 1150°F (593° to 621°C) before furnace or air cooling
●  Harden by heating to 1875° to 1925°F (1024° to 1052°C) before oil quenching and tempering

APPLICATIONS OF STAINLESS STEEL 422
●  Aircraft parts
●  Steam and gas turbine components
●  High heat components

MACHINABILITY OF STAINLESS 422
Comparable to 18-8 but easier to machine
●  Help avoid galling with sharply ground tools
●  Maintain consistent speed and feed
●  Turning tools: 8-14° side rake
●  Drilling: 140° point
●  Threading: grind tools with 10-15° back rake
●  Cobalt high-speed tools: turn at 90-120 sfpm, drill at 40-75 sfpm, mill at 70-120 sfpm, ream at 20-60 sfpm, roughing and finishing at 200-400 sfpm

Stainless Steel 329 Round Bars

We are one of the preeminent manufacturers and suppliers of Duplex Stainless Steel 329 Round Bars. Immensely useful for construction industries, these bars are offered by us in various sizes and finishes to choose from. Complying the industrial norms, our round bars last for long duration and available in bulk quantities at most reasonable rates.

Duplex Stainless Steel 329 was one of the earliest duplex steel which is reflected in its higher permitted carbon content. Its resistance to pitting (PREN about 32) and to crevice corrosion is below that of super duplex steels, therefore use in seawater is limited. Exposure to moderate and high temperature and less rapid cooling may cause embrittlement.
Accordingly, design stress values in ASME II do not extend above 260°C for S32900. Impact values are high at room temperature. However, the proportion and orientation of ferrite in welds and base material may significantly affect toughness at subzero temperatures.

Duplex Stainless Steel 329 also conforms, or is similar to EN/DIN 1.4460 and 00Cr25Ni5Mo2, SUS 329J1, AISI 329, UNS S32900, Brands SS44, SS 2324, Din X8CrNiMo27-5, ASME SA268, ASTM A268, ASTM A511, SS 14 2324, SIS 14 2324 and 453S

Duplex Stainless steel 329 can be used for heat exchangers, chemical tanks, refineries, shafts (marine, etc) pressure vessel parts, flanges, fittings & pipes for the oil and gas industries and offshore technology, paper industry, compressor parts and seawater desalination plants amongst many other applications.

Steel Grade 317 And 317L

Stock Sizes: Custom sizes available Chandan Steel World carries austenitic Stainless Steel grade 317 and 317L in stainless steel round bar per the American Society for Testing and Materials (ASTM) Specification A276, A314 and A580 for Stainless Steel grade 317 and A182 for Stainless Steel grade 317L

316 Round Bars

We are the dynamic, business-oriented organization, ranking among the utmost entities in providing 316 Round Bars. This round bar is manufactured utilizing the best quality steel & cutting-edge technology in accordance with the set international quality norms. The round bar offered by us is checked by our quality checker for ensuring its flawlessness. Our offered round bar is demanded in various industries for their seamless finish, high tensile strength & longer service life.

Features:
●  Excellent strength
●  Non-corrosive
●  Easy installation

Other Details:
●  Pharmaceutical
●  Chemical
●  Pulp and paper
●  Marinet
●  Textile
●  Petroleum
●  Mining
●  Transportation
●  Water filtration
●  Architectural applications in corrosive regions

Other Informations:
●  Laboratory benches and equipment
●  Springs
●  Heat exchangers
●  Ball valves
●  Compression fittings
●  Hose fittings
●  Threaded fasteners
●  Hardware
●  Pressure reducing valves
●  Flanges
●  Strainers and jewelry
●  Coastal architectural railings
●  Paneling and trim
●  Tanks
●  Storage vessels for corrosive liquids
●  Quick couplings
●  Sensor fittings
●  Food preparation equipment

Bar Types Available:
●  Round stainless steel bar
●  Flat stainless steel bar (H.A.R.P.)
●  Square stainless bar

Custom 450 UNS S4500 Round Bars

Custom 450* UNS S4500
A martinsitic precipitation hardening steel, Custom 450© stainless steel offers high strength combined with excellent corrosion resistance similar to 304 stainless in corrosion resistance with moderate strength similar to that of 410 stainless. As with most precipitation hardened alloys, Custom 450© stainless has excellent transverse properties.
Used when ease of welding and brazing in fabrication is required. Custom 450©, unlike many precipitation hardening grades, Custom 450© can be used in the annealed condition.
Applications: Valve parts, Paper mills, aircraft and power generation, chemical processing, nuclear and space craft.
Heat Treatment: Solution heat treatment, heat at 1875/1925f (1024/1052c cool to below 90f (32c) to allow material to fully martensite. Material can be air cooled, but should be rapidly quenched for best response to aging.
Aging: All solution treated materials: Condition H-900 4hrs and air cool. H-900 offers the best combination of ductility, strength and toughness. H-1150 increases ductility but decreases strength.

Custom 465 Round Bars

Alloy 465 is a martensitic, age hard enable alloy. Alloy 465 is capable of ultimate tensile strength in excess of 250 ksi in the over aged (H 950) condition. By over aging Alloy 465 to the H1000 condition, Alloy 465 obtains a superior combination of strength, toughness and stress corrosion cracking.
Alloy 465 is a martensitic, age harden able alloy. Alloy 465 is capable of ultimate tensile strength in excess of 250 ksi in the overaged (H 950) condition. By overaging Alloy 465 to the H1000 condition, Alloy 465 obtains a superior combination of strength, toughness and stress corrosion cracking.

Availability
Alloy 465 is available as Bar (Round, Flat, Square), Wire, Strip, Billet. For all stock availability contact Sales.

Specifications
●  AMS 5936
●  ASTM A693
●  ASTM A564
●  ASTM F899
●  MMPDS-01
●  UNS S46500

Additional Information:
●  Pay Mode Terms

15-5 PH Plate

15-5 PH Plate 15-5 PH plate, or precipitation hardened, stainless steel plate is a high strength, ferrite-free alloy used worldwide. 15-5 PH plate displays excellent fatigue and wear-resistant properties and good resistance to corrosion. 15-5 PH is a ductile material that exhibits minimal distortion when subjected to heat treatments. These properties make 15-5 PH plates ideal for a wide range of applications, including those in the aerospace, chemical, petrochemical, metalworking and food processing industries.

The products 15-5 PH plate is used to manufacture include:
●  Valves
●  Fittings
●  Shafts
●  Fasteners
●  Gears

15-5 PH plate is an ideal material for applications that require high fatigue and wear resistance coupled with good corrosion resistance. It is an economic material, as it is more cost-effective than high-nickel, non-ferrous alloys for most applications. At Altemp Alloys, we offer 15-5 PH plates in the BMS 7-240, ASTM-A-693 and AMS 5862 configurations. If you would like to inquire about pricing, please contact our team of experts.

15-5 PH Properties Stainless Steel Bars

15-5 PH STAINLESS STEEL BAR
15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-5 alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape.

Applications:
●  Aircraft components
●  High pressure corrosive fabricated parts such as valves
●  Shafts
●  Fasteners
●  Fittings and gears

347 Stainless Steel Bar

347 STAINLESS STEEL BAR
347 stainless is an austenitic stainless steel offering an excellent resistance to inter-granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to 1500O F. Alloy 347 alloyed with columbium-tantalum (referred to as niobium) allows good mechanical properties at high temperatures.

Applications:
●  High temperature gaskets
●  Rocket engine parts
●  Expansion joints
●  Aircraft collector rings
●  Exhaust manifolds
●  Chemical production equipment

Ams 2248e 15-5ph Stainless Steel Round Bars

ams 2248E 15-5ph
●  AVAIABLE SIZES UPTO 450 MM

Additional Information:
●  Minimum Order Quantity: 100 Kilogram(s)

UNS N02200 nickel Bar

200 Nickel BarUNS N02200
Nickel 200, also known as UNS N02200, is considered commercially pure 99% wrought nickel, one of the toughest metals. Its characteristics include excellent mechanical properties, a low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environments. It is useful in any environment below 600° F, as well as highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200 also has low corrosion rates in neutral and distilled water, it can be hot formed to any shape and formed cold by all methods.

Industries that use 200 include:
●  Aerospace
●  Chemical
●  Defense
●  Food Processing
- See more at: http://www.nsalloys.com/products/nickel-alloy-bar/200-nickel-bar#sthash.qMbwMXRZ.dpuf